Do you ever have those moments when you’re walking through your favorite store and see something you just have to have…and then you check the price tag? And it makes you want to cry?
Because that happens to me all the time. Seriously – all the time.
I’m pretty cheap when it comes to new furniture for my home – mostly because I know that with a little patience and creativity I can make something I love just as much as what I see in the stores for way less money. And that was exactly the case when I saw this beautiful wood-tiled dresser at West Elm. It’s beautiful and I longed to have one in my house, but that price tag? I just couldn’t do it!
Luckily, I’m a little bit creative and a lot stubborn, so I made one of my own.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
If you want to tackle this project, you’ll need:
An antique dresser
Scrap 1×4 wood – we used maybe one board total
White paint
Gray paint
Gorilla wood glue (or any wood glue you like)
3/4″ dowel rods (for drawer pulls)
1/2″ dowel rod (for drawer pulls)
We started off with this beautiful antique dresser that we found at a local flea market. We loved the clean lines, the tall frame, and (of course!) those casters. Drool. Our style is a pretty good mix of modern and more traditional/vintage furniture, so we liked that using this would lead to a slightly less sleek and modern look than the original, which fits right in with the rest of our house. It was basically perfect.
Image may be NSFW.
Clik here to view.
The first step for us was figuring out a way to inset the drawers a bit so that when we added the wood tiles they wouldn’t stick out. We wanted the entire front of the dresser to be flush (the West Elm one has the drawers slightly inset, but we thought a flush look would be a bit more fitting for our dresser).
Our original plan was to just move the drawer slides back a few inches in the dresser, which would hopefully make the drawers sit the way we wanted them, but thankfully it was an even easier fix than that with this particular dresser – there were little metal pieces on the inside of the drawers that stopped them from going all the way in. All we had to do was pull those out and make some new stoppers with some little dowel rods and we were good to go.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Next up was cutting all of our wood tiles.
Let me warn you – this project isn’t for the faint of heart…it took forever! But, I think the end result is totally worth it, so I won’t complain.
To make the tiles we took a few 1×4 boards that we had already laying around and cut them down to 1/4″ thick tiles. It was the quickest way we could think of to do it, and it also meant that the end-grain of the wood would be showing, which added some fun texture. It was a pretty quick job to cut the tiles – we just used a chop saw with a piece of wood clamped to it to make sure all of the tiles were the same size.
Our stack quickly grew, and soon enough we had a giant pile of wood tiles.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
When they were all cut, we gave them a quick whitewash. I wanted a bit of variety within the tiles, so we did a whitewash on some of them and a graywash on others. It was a subtle difference, but it makes the end product look a bit more random and varied, which I like.
Image may be NSFW.
Clik here to view.
Once our tiles were all dried and ready to go, it was time to attach them to the drawers. We didn’t want to nail them in because then we’d have a billion different nail holes to fill, so we just used some wood glue. We glued ’em on in a subway pattern and then clamped a board to the drawer while it dried to ensure they all stuck. As the tiles got wet with the glue, some of them started to bow, so clamping it down also kept that to a minimum. We let it all dry together for about 12 hours (just to be sure!) then removed the clamps, sanded down the edges, and that was all there was to it!
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
The last step was creating the drawer pulls – we knew we wanted ones similar to the inspiration piece, but we also knew that actually finding and buying those pulls would be challenging (not to mention expensive!) so, we decided to make our own! Corey bought a 3/4″ dowel, drilled two holes in the back, and inserted a small, 1/2″ dowel piece . We then spray painted the whole thing with some oil-rubbed bronze spray paint, and screwed ’em in!
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Once we put it all together, it looked a little something like this:
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
This whole project cost us under $200 (including the dresser itself!), which is just a fraction of the cost of the original dresser, and we were able to put our own spin on it to make it even better for us.
So, my friends, next time you’re in your favorite store and you see something that you need in your home but you gawk at the price, remember that it can be incredibly simple (and way cheaper!) to make your own version!